A very good PSU featuring high performance and silent operation.
FSP Hydro G 850 proved to be a solid unit that delivered very good performance with minimal noise and an attractive price. The cooling fan is very #quiet and the power supply operates in silent fan-less mode at low power levels...
Redundant computer power supplies have been a fixture in the enterprise server market since failover hardware solutions were first conceived to deal with contingency planning and system disaster recovery. FSP has now brought its Twins solution to the enthusiast market, and FSP have done it quite well.
While it may not be spectacular, FSP has delivered a very solid cooler at the first time of asking
Tim Pettersson from Sweden Mod with FSP HYDRO PTM+
MARK T is a casemod with focus on its own identity inspired by the Iron Man legacy. With a precise full flow radius pipe routing design, arc reactor implementation and the FSP Hydro PTM+ source of power, this build represents generation T, for Timpelay.
Richard Bowzer from United Kingdom Mod with FSP HYDRO PTM+”
Richard Bowzer believes that achieved with the main chamber having a more subtle carbon fibre effect on the PSU shroud and radiator and used a stronger popping effect for the rear cable and drain port panel and yes there is RGB PSU, HYDRO PTM+.
HYDRO PTM+ Mod - Wall Mod Pc By Ronnie Hara with FSP & Bitspower
“Wall Mod Pc, all the material I choose was aluminum and acrylic sheets only. All of the hardware was placed on the front of the case along with FSP PSU, Hydro PTM+, and Bitspower Water cooler parts. Chromed tubes and blue liquid were chosen for this theme.”